Running eSATA drive with single cable from laptop

My Dell Latitude E6520 has a combo eSATA/USB port. They make SATA drives with external enclosures that should be able to hook up to this kind of things. USB, by spec, carries power. It seems reasonable that I should be able to get a cable and an enclosure that grab that power and push it to the drive while carrying data at the same time. Easier said than done.

Tried this combo:

• Dell Latitude E6520
• Star Tech "infoSafe" silver power eSATA to SATA external hard drive enclosure (S2510PESAT) - $25
• Aleratec Power over eASATA cable (X0003ZRM9F) - $12

Initial connection shows now power when using just the eSATA cable and enclosure. However, if I connect the funky USB pig tail, then the power comes on and it works. After investigating with StarTech and Alertec, I came to the conclusion that the cable wasn't correct. Alertec sent me a replacement cable and magically everything started working. The new (correct) cable had cable ends that were molded with the words "SATA + USB" on them, indicating that it knew it was using USB power. The original (incorrect) cable did not.

Original investigation certainly confirmed that all my concerns with the cable were true. This post (http://forum.notebookreview.com/dell-latitude-vostro-precision/390744-power-over-esata-latitude-e.html) talks about Dell E6500 not directly supporting it, although it supposedly has the "modes" for it. It leads to various places that don't really tell me if things are supposed to work. It also has a link to another thread with some more analysis: http://forum.notebookreview.com/hardware-components-aftermarket-upgrades/349325-esata-external-hard-drive-enclosure-supports-power-combo-usb-port.html 

When I talked to StarTech, they indicated that it should always work if the right cable is in place. The laptop does NOT do anything crazy like disabling the USB power when the eSATA is connected.  Their claims is that their ESATAUSB3 cable should work properly ($25 cable). Thankfully my $12 cable for Alertec worked AFTER they sent me the correct one. Demerits to them for sending me the wrong one the first time.

As another possible solution, there are reports that this $13 drive enclosure from geeks.com works for both AND includes a cable: http://www.geeks.com/details.asp?invtid=HE-2521B&AID=10439518&CJPID=3640576&cm_mmc=CJ-_-2617611-_-3640576-_-Geeks.com_Gifts. The pictures don't necessarily indicate that it has a single eSATA/power cable, so it's tough to tell. 

After hooking things up I determined that  the eSATA connection is about 2x as fast as the USB connection with nothing difference except the cable hookup. I can copy a 3GB file from laptop to external drive in about 60 seconds. The same file over USB takes 120 seconds. Read caching during the USB copying process actually causes it to peak at 100 MBs, then slowly ramp down to about 40 MBs during the first 60 sec of the transfer, but then it freezes at 100% status for another 60 seconds while it finishes writing things. With the eSATA copy, it was a more constant 40-50 MB/s and gave an accurate representation of 100% completion, then finished immediately.

Teaching Firefox to use a CAC

Some of the sites I use require a CAC smart card to establish SSL access. (Forge.mil is an example of this.) Chrome and IE (shudder) are both smart enough to use a smart card for certificates out of the box on Windows. Unfortunately, Firefox doesn't seem to be set up to do it without some adjustment. These are the steps I used to enable smart cards (CAC) in Firefox.

First, you need some kind of client library that provides what Firefox needs. Two options for this are Active Client (standard use by DoD and other government agencies) and OpenSC. I chose OpenSC just because it seems to be fairly light weight and easy to install.

First, download and install OpenSC from it's web site. (http://www.opensc-project.org/opensc/wiki) Installation was fairly brain dead and easy. Unfortunately, it did NOT actually enable Firefox with the smart cards, so I had to use some older, more drastic methods.

I used and older set of instructions as a reference that popped up in Google: http://www.opensc-project.org/opensc/wiki/MozillaSteps. To do this, basically do the following:

1. Firefox: Tools > Options: Advanced tab
2. Manage Security Devices
3. "Load" a new security device
1. Name as "OpenSC PKCS#11 Module"
2. Browse to C:\Windows\System32\, choose opensc-pkcs11.dll
4. Click Ok, Ok, ..., Ok to finish everything

Now, when you access a CAC-required web site, it should pop up a box and ask you to select a smart card certificate. The interface isn't as pretty as either IE or Chrome, but it seems to work.

Update: I've noticed that accessing other SSL sites seems to be slightly broken now, so I'm not sure if this is a problem with OpenSC, or whether something else is going on.

Excellent plugin to view Firefox browsing trail as a hierarchical tree

I found a great plugin (add-on) for Firefox called "Tree Style Tab" that does an awesome job of organizing your open browser tabs in a hierarchical fashion that keeps track of nesting and the order in which you followed a trail while you chase down pages and information. It allows me to see the history of how I chased links and opened more tabs to go deeper down a search tree while researching some particular item. It gives an indication of the browser path or trail that you followed to get to a particular page in a tree hierarchy. It's similar to what I would call a "browser history tree" but is really about your current windows and tabs more than history.

Firefox Tree Style Tab Add-In

My problem: I use browser tabs. A lot. Meaning: it is not uncommon for me to have 50-100 of them open in 10-12 different windows at any given time. I usually know it's time to restart Firefox when it starts bumping up against the 2GB memory limit of a 32 bit process and I get 0.5 second delays when I type key strokes as it trundles through 2 GB of RAM trying to figure out what to do. Call it ADD, or whatever, but I use lots of browser tabs.

A typical use case for me is to chase down a technical solution to some problem I'm working on. It usually involves scouring Google and following trails of links looking for relevant information. One of the big drivers for having sooo many tabs is that I lose the ones I actually want to bookmark or otherwise make note of get lost among the other ones. I often want to go back up the tree a few pages to chase down the next set of potentially relevant links. Soon, I end up with so many horizontal tabs and windows that I can't keep track of ones that are actually useful as I assemble various pieces of the technical solution. The Tree Style Tab plugin allows me to get back up to the Google (or other) search that spawned my most recent train of thought. A similar case happens if I'm shopping for some technical item (e.g. a new PC) and need to do research around prices, specifications, etc. etc.

Awesome tool. I highly recommend it. I think it should be a standard feature of all browsers. Now, I just wish they had a version for Chrome, as well.

Custom resolution for Ubuntu VM running in VirtualBox on Linux

So, I've got a Ubuntu server linux box where I run VirtualBox VM's, including an Ubuntu Desktop machine that I remotely display on my Windows box. (Yeah, I know, confusing and overly complicated.) Anyway, when running Gnome on the Ubuntu desktop, the maximum resolution it would give me was 1360x768. Since I have a 1920x1200 monitor on my Windows machine where I run my X server, I wanted a bigger Ubuntu desktop.

The most useful post I found was this: http://www.ubuntugeek.com/how-change-display-resolution-settings-using-xrandr.html

I ran the following commands:

1. cvt 1680 1050 -- get a X modeline similar to "1680x1050_60.00" 146.25.... (more numbers)
2. xrandr --newmode {output of the previous modeline}
3. xrandr --addmode VBOX1 1680x1050_60.00 (causes the X display to flash)
4. Use System > Preferences > Monitors to pick my new resolution

Voila. Easy, peasy. Works great now.

Windows 7 idle screen saver doesn't start with KVM and wireless mouse

I noticed after installing Windows 7 on my machine that it no longer goes to screen saver when the machine sits idle for a while. Originally, I suspected this was due to the KVM that I had hooked up. It must be sending some kind of heartbeat signal which keeps the screen from going idle. Some googling revealed there was a known issue with using a MS wireless mouse that can cause this problem. The fix was to install some optional Windows Update fixes that deal with HID drivers. After installing the fix, it started going to sleep properly on my desktop. Unfortunately, I don't seem to have the same update options available for my Windows 7 Professional Dell laptop, so I'm not sure if it's a global fix.

In the end, I discovered that the real cause was, in fact, the old-school MS wireless mouse. I replaced it with a newer one and the problem magically went away on both my laptop and desktop machines.

Repairing 'svnsync: malformed file' error with subversion

I recently had a sync or other failure of svnsync which left me with a bum repository. Every time we tried to do svnsync, it reported "svnsync: malformed file." I got the same error with all svnadmin access.

I found this link: http://subversion.tigris.org/ds/viewMessage.do?dsForumId=1065&dsMessageId=1892873&orderBy=createDate&orderType=desc and provided some good clues. I noticed that my file in db\revprops\0 had junk in it instead of normal stuff. It should have looked like this:

K 8
svn:date
V 27
2010-07-21T02:55:12.203323Z
K 17
svn:sync-from-url
V 45
https://portal.secureci.com/svn/secureci
K 18
svn:sync-from-uuid
V 36
b443ad56-1e36-4a4f-97ef-7144cc153033
K 24
svn:sync-last-merged-rev
V 1
0
END

What I did to fix it:

• cd c:/temp
• svnadmin create svn-sync2
• Copy hooks/pre-revprop-change.bat file from broken repository to new one
• svnsync --username svnsync initialize file:///c:/temp/svn-sync2 https://portal.secureci.com/svn/securci
• Copy the db/revprops/0/0 file from the new repos to the broken one
• Edit the 0 file and fix the 'sync-last-merged-rev' entry to have the correct number.
• Look in db/revprops/2 (or highest number) and locate the most recent numbered file (e.g., 2437)
• Change '0' value below "V 1" to be "2437"
• Change the V1 line to be "V 4" for 4 character length
• Run 'svnadmin verify .' in the main directory of your broken repository to make sure that it has everything intact. (This may take a little while.)
• Run 'svnsync --username svnsync synchronize file:///c:/SecureCIdata/svn/repos/secureci' and make sure synchronization goes smoothly

That's it. Syncing should work normally now.

DOS batch file stderr redirection

I never remember the whether the syntax of DOS file redirection is similar to normal Unix file redirection. It is. So I'm writing it down where I can find it.

CALL .\somescript.bat >> logfile.log 2>&1

Of note, I recently learned that redirecting output from a PowerShell script does NOT work very well and gives file handle errors. That's another story, entirely.